C-Bus 5200PG Spécifications télécharger pdf (Page 35)

Wiser Home Controller Installation Instructions

7. Now your PC is ready to access and configure the Wiser Home

Controller's router.

Windows VISTA

1. Connect the PC cable to an unused LAN port on the Wiser Home

Controller. Apply power to the router and allow it to initialise.

2. Click Start, Control Panel, and then Network and Internet: Manage

network connections.

3. Right-click the Local Area Connection icon and then click

Properties. The Local Area Connection Properties window appears.

4. Under the Networking configuration tab, locate and select Internet

Protocol Version 4 (TCP/IPv4) with the corresponding network card

and then click Properties. The Internet Protocol (TCP/IP) Properties

window appears.

5. Click Use the following IP Address and enter:

IP Address: 192.168.2.10

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.2.1

Note 1: Provide a unique address that does not conflict with any other

device on the LAN.

6. Now your PC is ready to access and configure the Wiser Home

Controller.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Pas de commentaire

C-Bus 5200PG Spécifications Page 35